Ridge Expansion Kit Progressive instruments for horizontal ridge expansion without bone removal. Discover more → OSSEOTOUCH India · Magnetic Mallet System
Kit Dynamic Guided
A guided system that condenses, doesn't drill
guided implant surgery using MAGNETODYNAMICS · 5 osteotomes + 5 stops · RealGuide · ImplaStation · smop compatible · also known as the Drill-Free Guided Surgery Kit
A site-preparation kit designed for use with MAGNETODYNAMICS that integrates with digital surgical guides (dental surgical guides / implant surgical stents). The 5 DGUIDED osteotomes condense and laterally distract bone instead of subtracting it — supporting an approach that aims to preserve cortical bone and improve site quality during guided implant placement. Designed as a sleeve-compatible adapter that complements existing 3D-printed surgical guide workflows (Formlabs, SprintRay, exocad). Standard 5 mm sleeve diameter.
Guided implant surgery·Drill-free preparation·Surgical stent compatible·Osteotomes designed for use with MAGNETODYNAMICS·RealGuide·ImplaStation·smop·D3-D4 maxilla·Guided implant surgery·Drill-free preparation
Let’s make this useful to you · Dynamic Guided Kit
What would you like to understand?
Start with a question. Explore the details here, or ask our team about the part that matters to you.
No appointment needed to ask.Talk with OSSEOTOUCH Product Specialist in India, your product contact in India.
WhatsApp OSSEOTOUCH IndiaWhat does this include?
See the instruments and their descriptions together, before comparing configurations or asking about a particular component.
How is it used?
Start with the original demonstration or protocol on this page. Then ask us about the instrument or step you would like explained.
Where would I start?
You do not need to decide on a configuration yet. Tell us which procedures you want to explore and what you already know about Magnetic Mallet.
01 The clinical problem
Conventional guided surgery
fights the bone it's trying to preserve
Traditional guided surgery relies entirely on rotary drills for site preparation. External irrigation cannot reliably reach the osteotomy beyond the surgical guide — creating a recognized risk of frictional heating during the preparation phase. Protocols require numerous sequential steps. And the drills work by subtraction — removing bone, especially problematic in low-density maxillary cancellous sites where mismatch between osteotomy and fixture compromises primary stability.
02 The Kit Dynamic Guided approach
Guided preparation
that condenses, doesn't drill
Kit Dynamic Guided integrates osteotomes designed for use with MAGNETODYNAMICS into the guided surgery workflow. The digital surgical guide provides trajectory and 3D positioning; the preparation using MAGNETODYNAMICS works through lateral expansion and progressive cortical compaction — without bone subtraction. The kit simplifies the conventional drilling sequence into 5 osteotomes + 5 stops: a linear, repeatable protocol designed to avoid rotary friction heat during the preparation phase.
Your next step, in India
Try it. Learn it. Make it part of your practice.
Request a demo or explore Pay as you use through your MyOSSEOTOUCH account.
02 Drill-free guided surgery at work
A new era
in guided surgery
OSSEOTOUCH walks through Kit Dynamic Guided — the osteotomes designed for use with MAGNETODYNAMICS, the depth stops, the guide compatibility, and the workflow that replaces rotary subtraction with lateral bone condensation.
03 Six benefits
Six benefits
of guided surgery using MAGNETODYNAMICS
One handpiece. One sleeve-compatible adapter. Six reasons guided implant preparation becomes more bone-preserving and more predictable than conventional rotary protocols.
No bone subtraction
Osteotomes condense and laterally distract cancellous bone instead of removing it. The volume of bone available for the implant is preserved end-to-end.
Avoids rotary friction heat
Advancement using MAGNETODYNAMICS is non-rotary. Avoids the rotary friction heat conventional drilling generates inside the guide where external irrigation cannot reach.
Simplified drilling sequence
5 osteotomes + 5 stops simplify the conventional guided-surgery drilling sequence. A linear, repeatable protocol — easier to standardize across cases and across operators.
Higher primary stability potential
Lateral compaction of cancellous bone supports the seating torque range commonly associated with immediate-loading protocols, particularly in soft maxillary sites.
Surgical-guide adapter compatibility
Designed as a sleeve-compatible adapter for 3D-printed surgical guides — works with Formlabs, SprintRay, exocad, RealGuide, ImplaStation, smop printed guides without changing your planning software.
Calibrated millimeter control
Stops with reduction rings (0.5 / 1.5 mm) and laser-marked osteotomes allow controlled depth advancement. The guide maintains the planned axis throughout the preparation.
Bring guided surgery using MAGNETODYNAMICS
to your practice
Talk with our specialist to evaluate Kit Dynamic Guided for your guided implant workflow, check compatibility with your existing surgical-guide vendor, or ask a product question.
Speak with the OSSEOTOUCH Product Specialist in India. For after-sales support, requests are taken in charge within 24 hours.
04 The kit · 5 osteotomes + 5 stops
Five osteotomes, five stops
one guided protocol
A compact kit replacing the conventional drilling sequence. Designed to integrate into any digital guided surgery workflow.
5 DGUIDED osteotomes
| Code | Role in sequence |
|---|---|
| DGUIDED 100 | First entry, site centering |
| DGUIDED 160 | Progressive widening |
| DGUIDED 200 | Lateral expansion + cancellous compaction |
| DGUIDED 230 | Coronal preparation for 4.2 mm-platform implants |
| DGUIDED 330 | Coronal preparation for 5 mm-platform implants |
Accessories included
5 calibrated millimeter stops for depth control · reduction rings 0.5 mm and 1.5 mm to fine-tune stops · angled fork adapter for tubular open guides and posterior sectors.
Optional add-on
A separate 5-drill access set (DLC-coated stainless steel, Ø 2.0 mm, lengths 6 / 8 / 10 / 12 / 14 mm) is available as an add-on for clinicians who need rotary cortical access support in particularly dense bone. Not included in the Standard configuration.
Two configurations
Standard — Compatible with any implant brand. Osteotomes, stops, fork adapter.
Extra — Standard + dedicated mounters and screwdrivers for OSSEOTOUCH implants (Connect K and Only One lines).
Software & guide compatibility: included in RealGuide and ImplaStation libraries; clinically used with smop. Sleeve diameter 5 mm standard (RealGuide sleeves Ø 5.05 mm, 9 mm offset). Compatible with traditional sleeve guides and tubular open guides via the fork adapter, including chairside-printed guides (Formlabs, SprintRay, exocad). Surgical-grade stainless steel, autoclavable. Compatible with new-generation Magnetic Mallet handpieces.
OSSEOTOUCH INDIA
Explore the right instruments for your practice. Talk with our team in India.
Local stock · 2-year device warranty · Product guidance from OSSEOTOUCH Product Specialist in India
05 Clinical applications
Four clinical applications
one guided workflow
Kit Dynamic Guided covers the guided implant scenarios where conventional rotary preparation is most likely to compromise primary stability or transmit excessive heat under the surgical guide.
Low-density maxillary sites (D3-D4)
Compaction of low-density cancellous bone in the posterior maxilla using MAGNETODYNAMICS. The osteotomes condense the bone walls of the osteotomy, supporting primary stability where rotary subtraction often falls short.
Narrow ridges requiring lateral expansion
Atraumatic lateral expansion of cortical plates within the guide trajectory, preserving bone volume in cases where rotary preparation would sacrifice the residual ridge. Subject to clinical judgment.
Post-extractive immediate implant placement
Guided preparation in fresh extraction sockets where bone preservation and primary stability are critical for immediate loading. Non-rotary preparation aims to preserve the residual bone walls.
Flapless mini-invasive guided surgery
Avoidance of rotary friction heat during preparation — particularly relevant in flapless workflows where soft-tissue management is constrained and irrigation access is limited.
OSSEOTOUCH INDIA
Explore the right instruments for your practice. Talk with our team in India.
Local stock · 2-year device warranty · Product guidance from OSSEOTOUCH Product Specialist in India
06 Clinical cases in practice
Documented clinical cases
by international clinicians
Four documented clinical cases of guided surgery using MAGNETODYNAMICS in real practice — different implant scenarios, different anatomic regions, same drill-free protocol.
OSSEOTOUCH INDIA
Explore the right instruments for your practice. Talk with our team in India.
Local stock · 2-year device warranty · Product guidance from OSSEOTOUCH Product Specialist in India
07 Frequently asked questions
Common questions
about Kit Dynamic Guided
What is Kit Dynamic Guided and what is it used for?
A site-preparation kit designed for use with MAGNETODYNAMICS that integrates with digital surgical guides (dental surgical guides / implant surgical stents) for guided implant surgery. The 5 DGUIDED osteotomes (100, 160, 200, 230, 330) and 5 calibrated millimeter stops simplify the conventional guided-surgery drilling sequence: the surgical guide provides trajectory and 3D positioning while the osteotomes condense and laterally distract bone instead of subtracting it. Also referred to as the Drill-Free Guided Surgery Kit.
Is the kit drill-free?
The core preparation using MAGNETODYNAMICS is rotary bur-free — the DGUIDED osteotomes do not rotate and are non-cutting. An optional access drill set is available as a separate add-on for clinicians who need rotary cortical access support in particularly dense bone. The Standard configuration includes only the osteotomes, stops, and adapters; the optional drill set is purchased separately when needed.
How does it differ from conventional guided surgery with rotary drills?
Conventional guided surgery relies on rotary drills, requires numerous sequential steps, and has a recognized risk of frictional heating because external irrigation cannot reliably reach the osteotomy beyond the guide. Kit Dynamic Guided avoids rotary friction heat during the preparation phase, simplifies the drilling sequence with 5 osteotomes + 5 stops, and condenses bone laterally instead of removing it.
What software and surgical guides is it compatible with?
The system is included in the RealGuide and ImplaStation libraries and has been used clinically with smop. RealGuide sleeves are Ø 5.05 mm with a standard 9 mm offset. Compatible with both traditional sleeve guides and tubular open guides (via the angled fork adapter), including chairside-printed guides. Designed as a sleeve-compatible adapter that complements existing 3D-printed surgical guide workflows (Formlabs, SprintRay, exocad).
Does it compete with dynamic navigation systems like Yomi or X-Guide?
No — Kit Dynamic Guided does not compete with navigation hardware. It works with static 3D-printed surgical guides (low-cost, widely adopted) and replaces only the rotary preparation step with osteotomes designed for use with MAGNETODYNAMICS. Complementary positioning rather than alternative — clinicians using static surgical guides gain a rotary bur-free preparation option without changing their planning software or guide-printing workflow.
Does it support immediate loading?
Lateral compaction of cancellous bone supports the seating torque range commonly associated with immediate-loading protocols, particularly in soft maxillary sites where rotary preparation may not achieve sufficient primary stability. Whether immediate loading is appropriate is always a clinical decision based on the achieved primary stability, the bone quality, the implant system, and the prosthetic plan.
What configurations are available?
Two versions. The Standard configuration is compatible with any implant brand and includes osteotomes, stops, and adapters. The Extra configuration includes Standard plus dedicated mounters and screwdrivers for OSSEOTOUCH implants (Connect K and Only One lines). Both configurations require a Magnetic Mallet handpiece. The optional access drill set is available as a separate add-on for either configuration.
How can I get product documentation and support in India?
Contact OSSEOTOUCH Product Specialist in India, for documentation, compatibility questions and a quotation. The Magnetic Mallet device has a 2-year warranty. For after-sales requests, use the service page or contact OSSEOTOUCH Product Specialist in India on WhatsApp.
Ready to get started?
Talk with our team — we'll help you evaluate Kit Dynamic Guided for your guided implant workflow and clarify your questions about the instruments.
Talk to OSSEOTOUCH Product Specialist in India
Contact OSSEOTOUCH Product Specialist in India, to discuss your workflow.
Email our specialists
osseotouchindia@gmail.com
Direct chat with our team.
Kit Dynamic Guided is part of the OSSEOTOUCH Magnetic Mallet system, manufactured by Meta Ergonomica S.r.l. (Italy). ISO 13485. Use restricted to qualified dental professionals according to the instructions for use.
Evidence on this technique
Peer-reviewed research on surgery based on MAGNETODYNAMICS. The studies concern the technique, not this single instrument.
