BLEXO Advanced extractors for controlled periotomy and complex atraumatic extractions. Discover more → OSSEOTOUCH India · Magnetic Mallet System
Crown Remover Kit
Pull crowns and bridges without breaking them
Atraumatic Crown & Bridge Removal · 1 handpiece + 3 steel tips · validated by Schierano 2026
An accessory for the OSSEOTOUCH Magnetic Mallet, designed to use MAGNETODYNAMICS for atraumatic removal of cemented crowns and bridges. Calibrated longitudinal traction, no shock waves, no compressor. Particularly relevant when restoration preservation matters, including rigid ceramic restorations. Evaluated in vitro for cement-retained implant-supported bridge models in the Schierano 2026 study (Journal of Functional Biomaterials).
Crown removal·Bridge removal·Atraumatic·Traction using MAGNETODYNAMICS·No shock waves·No compressor·Schierano 2026·Crown removal·Bridge removal
Let’s make this useful to you · Crown & Bridge Remover
What would you like to understand?
Start with a question. Explore the details here, or ask our team about the part that matters to you.
No appointment needed to ask.Talk with OSSEOTOUCH Product Specialist in India, your product contact in India.
WhatsApp OSSEOTOUCH IndiaWhat does this include?
See the instruments and their descriptions together, before comparing configurations or asking about a particular component.
How is it used?
Start with the original demonstration or protocol on this page. Then ask us about the instrument or step you would like explained.
Where would I start?
You do not need to decide on a configuration yet. Tell us which procedures you want to explore and what you already know about Magnetic Mallet.
01 The clinical problem
Conventional crown removal
is brute force in disguise
Cemented crowns and bridges are removed every day in dentistry — and the available tools fight the surgeon at every step. Spring-based instruments produce insufficient force. Manual hammers tire the operator and apply uncontrolled energy. Pneumatic systems require a compressor and transmit perceptible vibration. When all of these fail, burs and saws destroy the restoration — and the patient pays for a remake.
02 The Crown Remover approach
Traction using MAGNETODYNAMICS
without shock waves
The Crown Remover Kit threads onto the Magnetic Mallet handpiece and delivers calibrated traction through an 50-microsecond impulse generated by MAGNETODYNAMICS technology. The traction is perfectly longitudinal — debonding the cement with reduced lateral stress on the restoration, the abutment, or the implant compared with conventional percussion. The kit is designed to enable intact removal when cement type, abutment geometry, and clinical conditions allow.
Your next step, in India
Try it. Learn it. Make it part of your practice.
Request a demo or explore Pay as you use through your MyOSSEOTOUCH account.
02 Six benefits
Six benefits
of crown removal using MAGNETODYNAMICS
One handpiece. Three tips. Six reasons crown and bridge removal becomes faster, safer, and more predictable than conventional protocols.
Speed
Removal in seconds rather than multiple attempts. Traction using MAGNETODYNAMICS works in microseconds — what previously needed many tries now resolves quickly on temporary cementations.
Lower peak forces
Schierano (2026) measured the lowest peak forces among tested instruments across 210 removal tests vs. sliding hammer and Coronaflex.
Restoration preservation
Designed to enable intact removal when cement type, abutment geometry, and clinical conditions allow. Restorations may be re-cemented when clinically appropriate.
Restoration-friendly approach
Particularly relevant when restoration preservation matters, including rigid ceramic restorations such as zirconia and lithium disilicate, subject to clinical judgment.
No learning curve, no compressor
Threads onto the Magnetic Mallet handpiece you already own. No compressor, no special maintenance, no separate device to manage.
Reduced patient discomfort
The 50-microsecond impulse is below the threshold typically perceived as vibration. No prolonged mechanical noise during the procedure.
03 Crown Remover at work
See it in action
crown removal using MAGNETODYNAMICS
Two demonstration videos of the Crown Remover Kit on the OSSEOTOUCH Magnetic Mallet — handpiece coupling, tip selection, and the longitudinal traction sequence on cemented restorations.
Bring crown removal using MAGNETODYNAMICS
to your practice
Talk with our specialist to evaluate the Crown Remover Kit for your prosthetic workflow, check compatibility with your existing Magnetic Mallet handpiece, or ask a product question.
Speak with the OSSEOTOUCH Product Specialist in India. For after-sales support, requests are taken in charge within 24 hours.
04 The kit · 1 handpiece + 3 tips
One handpiece, three tips
one workflow
The Crown Remover Kit threads onto the Magnetic Mallet handpiece via the standard threaded coupling. Three interchangeable steel tips cover single crowns, short bridges, and longer-span bridges.
Levacorone Handpiece
Steel traction handpiece that threads onto the Magnetic Mallet via the standard threaded coupling. Develops perfectly longitudinal traction for controlled removal of cemented crowns and bridges.
3 Interchangeable Steel Tips
| Tip geometry | Indication |
|---|---|
| Single-crown tip | Single cemented crowns on natural abutments or implant-supported single crowns |
| Short-bridge tip | Short-span bridges (typically 3 units) |
| Long-span tip | Longer-span bridges with multiple abutments |
Steel construction (handpiece + tips). Autoclavable using standard sterilization protocols. Reusable; inspect tips according to standard clinical maintenance protocols. Compatible with new-generation Magnetic Mallet handpieces.
OSSEOTOUCH INDIA
Explore the right instruments for your practice. Talk with our team in India.
Local stock · 2-year device warranty · Product guidance from OSSEOTOUCH Product Specialist in India
05 Clinical applications
Four clinical applications
one removal workflow
The Crown Remover Kit covers the prosthetic-removal scenarios where conventional instruments are most likely to damage the restoration or the supporting structure.
Cemented crowns — single units
Atraumatic removal of single cemented crowns on natural abutments or implant-supported single crowns. Restoration preserved for re-cementation when clinically appropriate.
Bridge removal — short and longer span
Three tip geometries cover short bridges (3 units) and longer-span bridges. Longitudinal traction prevents lateral stress on bridge components.
Zirconia and rigid-ceramic restorations
Particularly relevant when restoration preservation matters, including zirconia and lithium disilicate, subject to clinical judgment. Outcomes depend on cement type, restoration design, and the clinical scenario.
Implant-supported restorations
Crown and bridge removal on implant abutments — the specific scenario evaluated by Schierano (2026) in vitro. Designed to avoid rotary force to the implant body and minimize lateral stress on the abutment.
OSSEOTOUCH INDIA
Explore the right instruments for your practice. Talk with our team in India.
Local stock · 2-year device warranty · Product guidance from OSSEOTOUCH Product Specialist in India
06 Scientific evidence
Validated by peer-reviewed research
An independent 2026 in-vitro study by the University of Turin and the Polytechnic of Turin compared three crown/bridge removal instruments — the OSSEOTOUCH Magnetic Mallet, sliding hammer, and Coronaflex — across 210 removal tests on 7 bridge geometries with temporary and permanent cement types. Study scope: cement-retained implant-supported bridge models. Generalization to other clinical scenarios requires judgment.
210 removal tests
(Schierano 2026)
(Schierano 2026)
7 bridge geometries
tested
tested
3 instruments compared
MM · sliding hammer · Coronaflex
MM · sliding hammer · Coronaflex
Lowest peak forces with MM
among tested instruments
among tested instruments
Peer-reviewed source
Key findings: Magnetic Mallet showed comparable efficiency to the sliding hammer for temporary cementations with lower peak forces. Coronaflex (pneumatic) showed lower success rates and higher forces. For permanent zinc phosphate cement, most bridges were not removable across all three instruments tested. Minimal inter-operator variability at power level 4 with the Magnetic Mallet. Study scope: cement-retained implant-supported bridge models in vitro; generalization to other clinical scenarios requires clinical judgment.
OSSEOTOUCH INDIA
Explore the right instruments for your practice. Talk with our team in India.
Local stock · 2-year device warranty · Product guidance from OSSEOTOUCH Product Specialist in India
07 Frequently asked questions
Common questions
about the Crown Remover Kit
What is the Crown Remover Kit and what is it used for?
An accessory for the OSSEOTOUCH Magnetic Mallet, designed to use MAGNETODYNAMICS for atraumatic removal of cemented crowns and bridges. The Levacorone handpiece threads onto the Magnetic Mallet via the standard coupling and delivers calibrated longitudinal traction in 50-microsecond impulses. Three interchangeable steel tips cover single crowns, short bridges, and longer-span bridges.
Do I need the Magnetic Mallet to use the Crown Remover Kit?
Yes. The Crown Remover Kit is an accessory that requires the Magnetic Mallet handpiece. If you already own a Magnetic Mallet, the Crown Remover Kit adds a new capability without buying a new device.
Is the Crown Remover Kit autoclavable?
Yes. All components — handpiece and the three steel tips — are fully autoclavable using standard sterilization protocols. Steel construction designed for repeated sterilization cycles. Inspect tips according to standard clinical maintenance protocols.
Does it work on zirconia restorations?
Particularly relevant when restoration preservation matters, including rigid ceramic restorations such as zirconia, subject to clinical judgment. The 50-microsecond impulse generated by MAGNETODYNAMICS technology is too brief for sustained shock-wave transmission, supporting an approach that aims to reduce cyclic stress on the restoration during removal. Outcomes depend on cement type, restoration design, and the clinical scenario.
What clinical evidence supports the Crown Remover Kit?
Schierano et al. (2026), an independent in-vitro study by the Dental School Università di Torino, Università di Genova, and PolitoBIOMed Lab Politecnico di Torino, published in Journal of Functional Biomaterials (DOI 10.3390/jfb17010033). The study evaluated the kit specifically for cement-retained implant-supported bridge models. Across 210 removal tests on 7 bridge geometries: Magnetic Mallet showed comparable efficiency to the sliding hammer for temporary cementations with lower peak forces; Coronaflex showed lower success rates and higher forces; for permanent zinc phosphate cement, most bridges were not removable across all three instruments tested. Clinical extrapolation to other scenarios requires judgment.
Can I remove implant-supported crowns and bridges?
Yes — this scenario was specifically evaluated by Schierano (2026) for cement-retained implant-supported bridges in vitro. Longitudinal traction using MAGNETODYNAMICS is designed to avoid transmitting rotary force to the implant body and to minimize lateral stress on the abutment. Final outcome in clinical practice depends on abutment design, cementation, and the clinical scenario.
How does the Crown Remover Kit compare to a pneumatic crown remover (Coronaflex-class)?
No compressor required — the kit threads onto the Magnetic Mallet handpiece already in the practice. The 50-microsecond impulse is below the threshold typically perceived as vibration. In the Schierano (2026) in-vitro study, Coronaflex showed lower success rates and higher forces vs. Magnetic Mallet across the tested combinations.
How can I get product documentation and support in India?
Contact OSSEOTOUCH Product Specialist in India, for documentation, compatibility questions and a quotation. The Magnetic Mallet device has a 2-year warranty. For after-sales requests, use the service page or contact OSSEOTOUCH Product Specialist in India on WhatsApp.
Ready to get started?
Talk with our team — we'll help you evaluate the Crown Remover Kit for your prosthetic workflow and clarify your questions about the instruments.
Talk to OSSEOTOUCH Product Specialist in India
Contact OSSEOTOUCH Product Specialist in India, to discuss your workflow.
Email our specialists
osseotouchindia@gmail.com
Direct chat with our team.
The Crown Remover Kit is part of the OSSEOTOUCH Magnetic Mallet system, manufactured by Meta Ergonomica S.r.l. (Italy). ISO 13485. Use restricted to qualified dental professionals according to the instructions for use.
More evidence
The studies above concern surgery based on MAGNETODYNAMICS. The full collection is indexed here.
